Tamiya TRF421X Upper Deck Graphite 2mm for Tuning - O-TCP010 by Factory Pro  [FP-O-TCP010]

Price:
NZD$27.84
Brand:
Factory Pro
Model:
FP-O-TCP010
Condition:
Brand New
Write a review

Setup-focused graphite deck for TRF421X

This aftermarket upper deck is made to fit the Tamiya TRF421X chassis and is offered by Factory Pro as O-TCP010. It is an RC component intended for drivers who want to vary chassis rigidity as part of setup tuning.

The 2mm graphite construction alters torsional stiffness compared with stock material, allowing adjustments to mid-corner support and turn-in characteristics. This response is best evaluated in combination with suspension changes to find a balanced setup for specific track conditions.

Installation notes: the deck uses the TRF421X's existing mounting features and typically fits with the stock fasteners. After mounting, run controlled test laps and tweak damping and ride-height settings to understand the deck's impact on handling.

Specifications

  • Item: Upper deck
  • Material: Graphite 2mm
  • Model Number: O-TCP010
  • Compatibility: Tamiya TRF421X

Use the O-TCP010 deck to experiment with chassis stiffness as part of a methodical tuning process alongside suspension and geometry changes.

How does the 2mm graphite influence cornering balance?

Thinner graphite generally increases torsional stiffness relative to flexible stock decks, which can tighten mid-corner grip and sharpen turn-in. The exact effect depends on the rest of the setup.

Where should I begin tuning after installing this deck?

Start with baseline ride height and damper settings, then make small increments to camber and toe while noting handling changes during short runs.

Can I combine this deck with other aftermarket plates?

Yes. Mixing deck thickness or lower plate materials affects overall stiffness; test combinations incrementally to understand cumulative effects.

What test protocol is recommended after fitting O-TCP010?

Perform consistent short runs, record lap times and driver notes, then alter one variable at a time such as damper valving or anti-roll bar stiffness to isolate the deck's influence.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved