TAMIYA TT-01 TYPE-E Chassis Graphite Upgrade TT01-E35/WO by 3Racing  [TT01-E35/WO]

Tamiya TT-01 TYPE-E Graphite Conversion Kit - 3Racing TT01-E35/WO
Price:
NZD$147.40
Brand:
3Racing
Model:
TT01-E35/WO
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Overview of the TT-01 TYPE-E graphite upgrade

This kit provides an aftermarket graphite conversion for the TAMIYA TT-01 TYPE-E platform, supplied as TT01-E35/WO. Selected plastic sections are swapped for graphite panels to stiffen key zones and enable more subtle setup adjustments while keeping the original chassis geometry.

The conversion is aimed at tuners who refine handling through chassis rigidity and weight distribution. Installation uses the TT-01 TYPE-E stock mounting points so the graphite pieces work with your current suspension, motor, ESC, and drivetrain layout.

Use the conversion as a tuning tool: it changes the chassis reaction to inputs and surface irregularities, which you can combine with suspension tuning and gearing tweaks to achieve the desired balance for track running.

Specifications

  • Item: Graphite conversion kit
  • Material: Graphite
  • Model Number: TT01-E35/WO
  • Compatibility: Tamiya TT-01 TYPE-E

When adjusting chassis stiffness on the TT-01 TYPE-E, this graphite conversion gives a clean material change to complement suspension and drivetrain setup; consult your chassis manual for fitment guidance before you start.

Can I fit this to other TT-01 variants?

The kit is produced for the TT-01 TYPE-E layout. Other TT-01 variants can differ in mounting geometry, so check measurements before assuming compatibility.

Will graphite make the car too stiff?

Graphite increases stiffness in the fitted areas, which changes handling feel. Tuning springs, anti-roll bars, and ride height together with the panels will help dial in the balance you want.

Is any drilling or trimming required?

The kit is designed for direct fit to the TT-01 TYPE-E mounting points in most cases, but always trial-fit components and follow the kit instructions for any minor adjustments.

Will running conditions change tyre wear?

Changes in chassis stiffness can alter load transfer and thus tyre behaviour. Monitor tyre wear during setup sessions and adjust camber, toe, or damping as needed.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved