3RACING TT01-M08 Foam Bumper for Tamiya TT-01 Type-E - Lightweight Front Guard  [TT01-M08]

Tamiya TT-01 Type-E Option Replacement Foam Bumper - 3RACING TT01-M08
Price:
NZD$4.30
Brand:
3Racing
Model:
TT01-M08
Condition:
Brand New
Write a review

Add Impact Protection to Your Tamiya TT-01 Type-E with 3RACING TT01-M08

For pilots wanting better front-end protection on the Tamiya TT-01 Type-E, the 3RACING TT01-M08 foam bumper is a sensible upgrade. The foam helps take the sting out of minor collisions and keeps repairs to a minimum.

How the 3RACING Bumper Helps

The TT01-M08 matches the TT-01 Type-E mounting layout so it sits correctly and spreads impact forces. The foam surface cushions hits to lower the chance of bent parts or chassis scuffs.

Fitting Notes

Installation is direct: remove the existing bumper on your Tamiya TT-01 Type-E, position the 3RACING TT01-M08 and re-fit using the stock hardware. Recheck tightness after a few laps to ensure everything stays in place.

Is extra trimming required for body fitment?

Most standard bodies that fit the TT-01 Type-E will work without trimming, but if your shell has custom cutouts test-fit before final securing.

Does the foam affect handling or balance?

The bumper adds minimal weight to the nose so handling changes are negligible for everyday driving and club competition.

What fasteners are needed to mount the TT01-M08?

The TT01-M08 uses the TT-01 Type-E's existing bumper mounting points. Use the original screws and check for correct torque when fitting.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved