TAMIYA TT02 Compatible Rear Knuckle Arm with Bearings - TT2022B by GPM  [TT2022B]

Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B
Price:
NZD$33.34
Brand:
GPM
Model:
TT2022B
GTIN:
4894538215076
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B" title="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B"
alt="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B" title="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B"
alt="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B" title="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B"
alt="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B" title="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B"
alt="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B" title="Tamiya TT02 Alloy Rear Knuckle Arm With Bearing - 1pr set - GPM TT2022B"

Alloy rear knuckle for TT-02 rear hubs

This aftermarket rear knuckle arm is intended for use on TAMIYA TT02 chassis variants and is supplied as a 1 pair set including bearings. Constructed from aluminium, it replaces the stock plastic knuckle to deliver a stiffer mount for the rear hub and axle assembly.

Fitment is aimed at TT-02 platform versions that share the common rear hub geometry. Ball bearings supplied with the unit reduce spindle friction compared with plain bushings, which helps maintain steady wheel spin under load during setup and running.

Installation guidance: the part installs into the existing knuckle location and is designed to work with the original fasteners and axle pin arrangement. Check hex screws and axle pins for wear before refitting, and verify axle retention and hex engagement after installation. No special hardware is normally required for standard TT-02 hub setups.

Tuning benefits: this aluminium knuckle arm gives a firmer pivot for rear suspension adjustments and is suited to hobbyists wanting a metal replacement for consistent suspension behaviour during tweak sessions.

Specifications

  • Item: Rear knuckle arm with bearing, 1pr set
  • Material: Aluminium alloy
  • Model Number: GPM TT2022B
  • Compatibility: TAMIYA TT02 chassis

For stronger pivot points and longer service life in rear hub assemblies, choose this aluminium knuckle arm when upgrading or repairing a TT-02.

Will this fit my TT02 without modification?

If your TT02 uses the standard rear hub geometry, it should fit without modification. Double-check your hub layout against TT-02 specs first.

What bearings are included?

The package includes the ball bearings for the wheel spindle positions as noted in the product details.

Should I replace screws when fitting?

Not usually, but inspect the existing screws and pins for wear and replace any that are stripped or fatigued before final assembly.

Does the alloy knuckle need special maintenance?

Routine checks of bearing condition and hardware torque are recommended; the alloy itself requires no special care beyond cleaning and inspection.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved