Tamiya TT-02B Front Aluminum Suspension Arms Set, Light Blue - JR-TT2B04-LB by Jazrider  [JR-TT2B04-LB]

Aluminium front suspension arms tailored to TT-02B

This anodised light-blue aluminium front arm set is produced for the Tamiya TT-02B chassis. The metal arms give a more consistent front-end feel and higher wear resistance than standard plastic components, useful for tuned setups and repeatable handling on club tracks.

Installation is direct-fit to the TT-02B mounting points. Remove the original front arms and refit these using the stock pivot pins and compatible hardware, check that mounting holes line up before final tightening, and ensure steering links and servo horns clear the new arms. Because the chassis stiffness will change, expect some differences in steering and rebound and adjust camber, toe, or shock damping accordingly.

Tuning notes: verify hex screw sizes and lengths when reusing hardware, inspect bearings or bushings for wear during the swap, and always conduct a low-speed shakedown run to confirm steering smoothness and suspension travel.