TEAM CORALLY SKETER XL4S Wheel Hex Adapter Kit 13mm - SKE010/+13MM by GPM  [SKE010/+13MM]

13mm wheel offset adapters for SKETER XL4S

This 13mm hex adapter set is built for the TEAM CORALLY SKETER XL4S chassis and carries model SKE010/+13MM. The adapters mount between the knuckle arms and the wheel to change wheel spacing without modifying hub or axle geometry.

The design includes several threaded mounting positions so you can pick different offsets and fine-tune track width. Altering track width with these adapters can stabilise the truck and change cornering behaviour to suit surface traction and driver setup.

Fitting tips: position the adapters at the wheel hub, tighten using the supplied screws, and recheck wheel runout and clearance after installation. These adapters are an aftermarket 1/10 scale accessory for SKETER XL4S configurations and should be inspected for fit prior to use.

Package contents: Hex Adapter - 2pcs, M4x3x15 Screw Shaft - 2pcs, M4x2.5x15 Screw Shaft - 2pcs, original part number C-00180-329.