TEAM LOSI MINI-T 2.0 16T Pinion Gear Hardened LM016T by GPM  [LM016T]

TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T
Price:
NZD$8.21
Brand:
GPM
Model:
LM016T
GTIN:
4894538350067
Condition:
Brand New
1 Reviews
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"

16T hardened motor pinion for Mini-T

The LM016T is supplied as a simple, robust replacement pinion for MINI-T 2.0 2WD models requiring a 16T motor gear. Constructed from hardened 45# steel, it is built to resist wear while keeping meshing consistent.

Notes on fitment: this pinion has a 2mm centre bore and a 0.5mm tooth pitch. It is intended for use with motors and spur gears that share those dimensions to preserve smooth drivetrain operation and correct ratios.

Fitting advice: remove debris from the motor shaft, verify shaft straightness, and fit the pinion using the included screw shaft. Set the mesh so the teeth contact lightly and evenly, then test at low speed and recheck fastener tightness.

Packing includes

  • Pinion gear - 1 pcs
  • 3x3 screw shaft - 1 pcs

Compatible Models

  • TEAM LOSI MINI-T 2.0 2WD

 

Product Reviews
1 Reviews
rating
I am very satisfied with their library of parts, I have at least one GPM piece in every RC car I own, wish they could include logo stickers so I can put them on my RC car bodies though. Only thing thats a bother is the shipping times but its not a big dea

Can I use this on other 1/18 motors?

Yes, provided the motor shaft is 2mm and the spur gear pitch is 0.5mm the pinion will fit those setups.

What maintenance is required?

Periodically clean the gear and inspect for wear, check the mounting screw and gear mesh after a few runs to ensure continued smooth operation.

Is the material corrosion resistant?

The pinion is hardened 45# steel for wear resistance; treat it like other steel gears and avoid prolonged exposure to moisture to reduce surface corrosion.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved