Team Losi Mini-T 2.0 Replacement 14T Hardened Steel Pinion LM014T by GPM  [LM014T]

14T pinion for Mini-T 2.0

This aftermarket pinion fits Team Losi Mini-T 2.0 2WD models and is listed as LM014T. Manufactured from hardened 45# steel, it carries a 2mm motor-bore and a 0.5mm tooth pitch with 14 teeth. It mounts to the motor shaft to drive the vehicle's spur gear.

Key fitting notes and installation points:

• Design: hardened 45# steel pinion, 14T, 0.5mm pitch.
• Bore: 2mm centre hole designed for motors with a 2mm shaft; check your motor before fitting.
• Installation: push onto the motor shaft, set the gear mesh with the spur gear, lock the set screw and check for axial runout to prevent uneven wear.
• Tuning role: installing this 14T pinion adjusts the final drive ratio relative to other sizes, changing acceleration and top speed balance depending on motor and setup.
• Included items as supplied: pinion gear (1 pcs) and a 3x3 screw shaft (1 pcs).

Suitable as a tuning or service part for RC use only, not for full-scale vehicles.