Team Losi SUPER BAJA REY Aluminium Servo Bracket SB024 by GPM  [SB024]

Aluminium servo bracket for the Super Baja Rey

This 11pcs aluminium servo bracket is intended for Team Losi SUPER BAJA REY applications and provides a rigid mounting point between the main chassis and sub chassis. The assembly combines a precision aluminium bracket with stainless fasteners to replace or upgrade the stock mounting hardware and cut down flex at the servo mount.

The bracket's function is to steady the servo and channel steering loads directly into the chassis stack. Properly fitted, it reduces unwanted servo play under load, helping steering repeatability and keeping servo trim stable during aggressive runs or rough landings on the Super Baja Rey chassis. Manual reference: LOS251059.

Installation guidance: align mounting holes to existing chassis bosses, start screws by hand to check fit, and torque evenly to prevent misalignment. Confirm servo spline engagement and horn orientation before final tightening. Note that the aluminium bracket will change local stiffness, so verify clearance around adjacent parts after installation.

A practical aluminium upgrade for a tidier, firmer servo installation on the Super Baja Rey chassis, supplied with the fasteners required for a straight swap.