Team Powers Radon-ProV4-1S Lightweight 1S Racing ESC  [TP-Radon-ProV4-1S]

Team Powers Radon Pro V4 1S (200A) Speed Control (included USB device) (TP-Radon-ProV4-1S)
Price:
NZD$306.65
Brand:
Team Powers
Model:
TP-Radon-ProV4-1S
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Team Powers Radon Pro V4 1S (200A) Speed Control (included USB device) (TP-Radon-ProV4-1S)" title="Team Powers Radon Pro V4 1S (200A) Speed Control (included USB device) (TP-Radon-ProV4-1S)"
alt="Team Powers Radon Pro V4 1S (200A) Speed Control (included USB device) (TP-Radon-ProV4-1S)" title="Team Powers Radon Pro V4 1S (200A) Speed Control (included USB device) (TP-Radon-ProV4-1S)"

Compact power and predictable response on the circuit

The Team Powers Radon-ProV4-1S is a purpose-built ESC for hobbyists who prioritise control and thermal efficiency. Rated around 200A per phase, it supplies substantial drive while keeping temperatures in check. The small dimensions and a weight near 37g help lower vehicle roll and improve handling through corners.

Thermal and efficiency improvements in the hardware

The design features upgraded FET components to reduce electrical resistance, improving output power and trimming operating temperature by about 6%. The newly styled case enhances heat transfer, offering another 6% reduction in heat build-up. These changes also cut mass by roughly 10% compared to earlier variants.

Software flexibility with auxiliary inputs

With Ch3/Ch4 inputs available, users can map extra controls for throttle shaping, brake feel and turbo timing. Brake response has been reworked for greater linearity and smoother modulation. The updated PCB layout contributes to consistent operation during extended sessions.

Specifications

  • Controls: Forward/Brake/Reverse
  • Input Voltage: 1S LiPo
  • BEC: 6V/7.4V selection, max ~3A
  • Motor Limit: 3.5T or over
  • Max Current: ~200A per phase
  • Size: ~38x30x17mm
  • Weight: ~37g (excluding wiring and fan)

For drivers seeking a small, efficient ESC with adjustable behaviour, the Team Powers Radon-ProV4-1S offers a balanced mix of power and thermal control.

Yes, it is compatible with motors of 3.5T and higher, so typical high-turn brushless units are supported.
The selectable BEC provides either 6V or 7.4V and can deliver up to roughly 3A, suitable for standard high-torque servo setups.
Use quality low-resistance wiring and solid solder joints to maintain the ESC's performance and keep heat generation to a minimum.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved