Team Powers BLM-7200KV-MBX Compact 1/27 Mini-Z Race Motor  [TP-BLM-7200KV-MBX]

TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)
Price:
NZD$92.41
Brand:
Team Powers
Model:
TP-BLM-7200KV-MBX
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)" title="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)"
alt="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)" title="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)"
alt="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)" title="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)"
alt="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)" title="TEAMPOWERS MBX 7200KV sensored brushless motor (for 1/27th miniz) (TP-BLM-7200KV-MBX)"

High Density Performance for Mini-Z Circuits

The Team Powers BLM-7200KV-MBX is a sensored brushless motor developed for 1/27 Mini-Z models. Its compact 16mm x 27mm size and light overall mass are geared toward tight circuit layouts where agility matters as much as outright speed.

Controlled Acceleration with Sensored Feedback

Rated at 7200KV, this motor delivers quick spool-up and reliable top speed while the sensored configuration reduces cogging and refines low speed throttle feel. That combination helps drivers carry speed more consistently through technical corners.

Specifications

  • Sensor Type: Sensored
  • Motor Dimension (Diameter x Length): 16mm x 27mm
  • Shaft Diameter: 2mm
  • Weight: 18.5g
  • KV Rating: 7200KV

Well suited for racers aiming to tighten lap consistency, this motor gives a useful mix of nimble handling and high revving capability for 1/27 Mini-Z competition.

Is a sensored motor worth the upgrade?

Yes, sensored motors bring smoother low-end torque and better throttle predictability, which helps when you need precise speed control on narrow tracks.

What gearing should I try first?

Start with the gearing you used before and trial small changes. Because this motor is 7200KV, small increases in pinion teeth will raise top speed but also heat and draw.

Can I use the same ESC as before?

You need an ESC that supports sensored operation for full low-speed benefit, though some setups will run in sensorless mode if needed.

How do I check fitment on my Mini-Z?

Measure the motor bay and shaft alignment, confirm the 2mm shaft and mount points match, and ensure there is clearance for the motor body before final installation.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved