Titanium 45mm M4 Adjustable Turnbuckles for R/C - HUDY 992445 (2 pcs)  [HSP-992445]

HUDY 992445 - Titanium Adjustable Turnbuckle 45mm M4 L/R (2)
Price:
NZD$34.11
Brand:
HUDY
Model:
HSP-992445
Condition:
Brand New
Write a review

Machined titanium turnbuckles for precise linkages

This set contains two HUDY titanium adjustable turnbuckles, produced for R/C tie-rod and turnbuckle linkages that demand a balance of light weight and durability. The pair includes one left-thread and one right-thread piece for balanced steering adjustments. They are intended for hobbyist tuning and maintenance tasks rather than structural modifications.

Fitting advice: remove the original turnbuckles and swap with these while ensuring matching M4 threads and correct handedness. Use the manufacturer-recommended locking or securing method on your model and confirm threads are fully engaged before final torque. Use suitable hex tools and only minimal thread-lock if advised for your platform.

Tuning benefits: these adjustable rods permit precise incremental changes to toe and steering geometry, refining feedback and handling. Titanium offers reduced mass and good corrosion resistance, but always confirm fit with your ball cups and rod ends prior to installation.

Specifications

  • Item: Titanium adjustable turnbuckle 45mm M4 L/R (2 pcs)
  • Material: Titanium
  • Model Number: HUDY 992445
  • Compatibility: For use in R/C turnbuckle/tie-rod linkages where M4 thread and 45mm length are appropriate

Use these when you need compact, corrosion-resistant turnbuckles to achieve finer steering and suspension setup; check thread pitch and rod-end fit before fitting.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Are titanium turnbuckles stronger than steel versions?

Titanium offers an excellent strength-to-weight ratio and good fatigue resistance. In many cases it resists corrosion better than standard steels, though specific strength characteristics depend on alloy and part design.

Will they noticeably reduce rotating or unsprung mass?

You may see a small reduction in rotating or unsprung mass compared with heavier metal alloys; the effect on handling is subtle but beneficial for precise steering feel.

Any special precautions during fitting?

Ensure threads are clean, hand-start the turnbuckle to confirm matching M4 engagement and correct handedness, then use the proper hex key. Avoid cross-threading and excessive torque.

How should I maintain them over time?

Inspect threads regularly, remove debris, and apply light lubricant if the environment warrants it. Replace any piece showing thread fatigue or deformation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved