TK10 V3 EXB 7075 25T Servo Arm TK3025TSH for PD RACING by GPM  [TK3025TSH]

PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH
Price:
NZD$36.05
Brand:
GPM
Model:
TK3025TSH
Condition:
Brand New
Write a review
alt="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH" title="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH"
alt="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH" title="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH"
alt="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH" title="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH"
alt="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH" title="PD RACING TK10 V3 EXB 7075 Alloy 25T Servo Horn - GPM TK3025TSH"

High-Strength 25T Servo Arm, 7075-T6

The TK3025TSH is a precision 25-tooth servo horn crafted from 7075-T6 aluminium for use with PD RACING TK10 V3 EXB steering systems. The straight-arm profile keeps the load path direct between the servo spline and tie rods for a firm, predictable feel.

Key design points include a forged-style 7075-T6 construction that improves wear resistance, selectable dual mounting holes to vary steering leverage and throw, plus an integrated spring arrangement to soften sudden impacts and protect the servo gearset. Where applicable, it replaces factory reference PD861-041.

Installation follows standard 25T procedures: place the horn on the servo spline, tighten the provided screw, and choose the tie-rod hole that matches your desired steering ratio. For reliable hardware retention apply a medium-strength threadlocker to the mounting screw.

Compatible Models

  • PD RACING 1/10 TK10 V3 EXB 4X4 Brushless RC Car

This CNC 7075 replacement arm is intended for racers and tuners seeking added longevity and finer steering adjustment on the TK10 V3 EXB platform, combining adjustable leverage with impact-mitigating design features.

Yes. The higher-strength 7075-T6 alloy and robust geometry improve resistance to wear and deformation, which can extend component life under demanding use.
The spring provides controlled give on sharp hits, dissipating some energy before it reaches the servo gears, which reduces the risk of stripped teeth or internal damage.
Where the mounting pattern and spline count match the factory item, the TK3025TSH is a direct replacement for PD861-041. Confirm compatibility with your chassis before purchase.
Inspect the spring and mounting hardware periodically, keep the spline area clean of debris and reapply threadlocker if you notice any loosening after running sessions.
7075-T6 is an aluminium alloy with good strength but is not inherently corrosionproof; normal care and avoiding prolonged moisture exposure helps maintain appearance and function.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved