Touring Car S3M Belt Pair 348mm - Arrowmax AM-910030  [AM-910030]

Overview of AM Medius S3M 348mm Belts

The Arrowmax AM-910030 AM Medius Belt S3M 348MM Front + Rear (2) includes two matched S3M profile belts cut to 348mm for use in belt-driven 1/10 on-road and touring layouts. These belts are intended as direct replacements where S3M tooth engagement is called for.

Fitment advice: route each belt over the correct pulleys following your chassis path, avoid twisting during installation, and set the recommended slack to minimise skipping. Check pulley alignment and adjust tension gradually while testing with short runs.

Tuning impact: fitting properly sized S3M belts helps maintain uniform tooth mesh and reduces drivetrain backlash, aiding consistent throttle control and steering precision on smooth surfaces like carpet or tarmac.

Hobbyists running belt-driven 1/10 cars can use AM-910030 to replace stretched or damaged belts with matched S3M 348mm parts; confirm pulley profile before installing.