TRAXXAS 1/10 Craniac Front Link Upgrade Aluminium CRA008 by GPM  [CRA008]

Upgrade aluminium links for Craniac

This two-piece aluminium front link set fits the TRAXXAS 1/10 Craniac Monster Truck as an aftermarket replacement (CRA008). Manufactured from aluminium to replace the standard front link arms, the parts are intended to modify front-end feel and the way the chassis responds during driving.

Fitting is straightforward for modders familiar with suspension work: remove the original plastic links, swap any ball studs or bearings required by your setup, install the aluminium links into the factory mounting points, and check that the suspension moves freely through full travel. Retain original fasteners unless the fitment requires alternatives.

In setup terms, aluminium links change the stiffness and add mass at the suspension link points, which can affect steering feedback and transient behaviour. Re-check toe and camber while the vehicle is on its wheels and run incremental tests to confirm the handling results before changing other settings.