TRAXXAS 1/10 Slash 4x4 Rear CVD Steel Upgrade 12mmx6mm Hex SSLA1277RHST by GPM  [SSLA1277RHST]

TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST
Price:
NZD$58.10
Brand:
GPM
Model:
SSLA1277RHST
GTIN:
4894538322477
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"

Rear axle overview

The SSLA1277RHST 8pc rear CVD drive shaft set from GPM is built as an aftermarket replacement for the TRAXXAS 1/10 Slash 4x4 rear axle. Constructed in Harden Steel #45, the CVD architecture maintains smooth rotation while the retractable elements preserve suspension rocker motion and clearances. Included is a spring steel wheel hex stabiliser to reduce movement during launches and fast turns, aimed at drivers wanting a tougher, more predictable rear drivetrain on electric Slash 4x4 platforms.

Installation notes: the parts mount at the rear axle position using the supplied screw pins and O-rings. Prepare for a simple rear diff and axle housing strip, and recheck hex retention and pin seating before operating the vehicle.

Packing includes

  • Item - 8pcs

Original Name / Part No:

6850X+6828X+6854X

Specifications

  • Item: TRAXXAS 1/10 Slash 4x4 rear CVD drive shaft, 8 pcs set
  • Material: Harden Steel #45
  • Model Number: SSLA1277RHST
  • Compatibility: TRAXXAS 1/10 Slash 4x4 (rear axle)

SSLA1277RHST offers a straightforward steel replacement to increase rear drivetrain toughness and reduce drivetrain deflection on 1/10 Slash 4x4 rigs; always confirm fit and secure fasteners during fitting.

This item is compatible with

  • TRAXXAS Slash 4X4

How much work is fitting these shafts?

Fitting requires removal of the rear differential and axle housing, but no specialist tools beyond standard hobby hand tools. Follow the supplied hardware sequence and check clearances as you assemble.

Do I need different wheel hexes?

The set is supplied with a 12mmx6mm wheel hex stabiliser; standard stock hexes are compatible but confirm retention after installation to avoid looseness.

Is any modification required to the axle housing?

No machining is expected for stock Slash 4x4 housings. The shafts are intended for direct-fit installation, though small clearances should be checked during assembly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved