TRAXXAS 1/8 X-Maxx Front Skid Plate - Aluminium TXM331F by GPM  [TXM331F]

TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F
Price:
NZD$30.17
Brand:
GPM
Model:
TXM331F
GTIN:
4894538242911
Condition:
Brand New
Write a review
alt="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F" title="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F"
alt="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F" title="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F"
alt="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F" title="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F"
alt="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F" title="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F"
alt="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F" title="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F"
alt="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F" title="TRAXXAS 1/8 X-Maxx Aluminium Front Skid Plate - 1pc set - GPM TXM331F"

Protective front skid for X-Maxx

This aluminium front skid plate serves as an aftermarket replacement for TRAXXAS 1/8 X-Maxx vehicles. It is supplied as a single, low-profile plate intended to mount at the front chassis to shield the underside during rough off-road use and setup work.

The plate focuses on practicality: it provides a durable contact surface that resists scraping and routes impacts away from delicate chassis parts. Since the listing covers the part identity only, verify fitment against your truck's existing mounting points before you fit it.

Installation notes: the plate replaces the factory front skid area and installs using the vehicle's current screw holes. Reuse original screws where suitable and check alignment before final tightening. For tuning, the plate helps stabilise front contact with terrain so suspension and chassis adjustments are easier to evaluate.

Specifications

  • Item Front skid plate
  • Material Aluminium
  • Model Number TXM331F
  • Compatibility TRAXXAS 1/8 X-Maxx

This aluminium skid plate is a straightforward protection upgrade that supports routine off-road use and chassis setup on the 1/8 X-Maxx platform.

This item is compatible with

  • TRAXXAS XMAXX

Is this compatible with stock X-Maxx front chassis mounts?

Compatibility is listed for TRAXXAS 1/8 X-Maxx. Inspect your vehicle's mount points to ensure they line up with the plate before drilling or modifying anything.

How should I maintain the aluminium surface?

Rinse off mud and grit, wipe with a mild cleaner, and dry fully. Check fastener interfaces after wet runs to avoid corrosion at contact points.

Will fitting this change ride height or handling?

The plate is low-profile and should not affect ride height; it offers a consistent skid surface that can make front-end responses more predictable during setup.

What fasteners are required?

The plate is designed to use the truck's existing screws. Replace any stripped or damaged fasteners with the correct size bolts before securing the plate.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved