TRAXXAS 4WD GT4 TEC 2.0 Aluminium Motor Mount Plate with Fins GT018 by GPM  [GT018]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018
Price:
NZD$23.82
Brand:
GPM
Model:
GT018
GTIN:
4894538294330
Condition:
Brand New
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate With Heat Sink Fins - 3pc set - GPM GT018"

Machined motor mounting plate with cooling ribs

This upgrade motor mount plate is produced for TRAXXAS 4WD GT4 TEC 2.0 owners and is supplied as a 3-piece set. CNC-style machining from 6061 T6 aluminium includes cooling ribs to assist heat transfer away from the motor and increases rigidity at the mounting interface during hard running.

Key notes: built for RC use only, the plate helps secure the motor and boosts cooling via the ribs while remaining compatible with the stock mounting pattern. The kit contains stainless steel flat head screws 3x10, 2 pcs for fastening.

Fitment and setup info: compatible with the original 70T spur gear layout and the four mounting holes labelled A-D. Recommended pinion choices by hole position are listed below to guide gear selection:

  • From A to A: 20T pinion.
  • From B to B: 21T pinion.
  • From C to C: 22T pinion.
  • From D to D: 23T pinion.

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0

Does the set include fasteners?

Yes, two stainless steel flat head screws 3x10 are included with the 3-piece mount plate set to assist installation.

Is this compatible with non-standard spur gears?

The mount is intended for the original 70T spur gear arrangement; if you run a different spur pattern, verify hole alignment before fitting.

Will the fins noticeably lower motor temps?

The integrated fins increase surface area and improve passive cooling; results depend on motor load and airflow but expect reduced peak temperatures compared with the unmodified plate.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved