TRAXXAS Craniac 1/10 Front Retention Mount CRA201F by GPM  [CRA201F]

TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F
Price:
NZD$35.82
Brand:
GPM
Model:
CRA201F
GTIN:
4894538098341
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"
alt="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F" title="TRAXXAS 1/10 Craniac Monster Truck Aluminium Front Body Post Mount With Delrin Post - 1set - GPM CRA201F"

Front retention mount for Craniac

This aluminium front body post mount is an aftermarket replacement built for the TRAXXAS 1/10 Craniac Monster Truck. It pairs a sturdy aluminium mounting base with a Delrin post to secure the shell while keeping servicing quick and simple.

The component is aimed at reducing front shell flex and preserving a consistent body position during big landings and technical off-road runs. The Delrin post sits in the body mounting hole and the aluminium base resists bending under impact and load.

The mount follows the same stock mounting footprint and attaches using the chassis screw holes. Its layout supports rapid body removal and refit for adjustments during setup or on race day, helping to limit body movement that can upset handling and airflow.

Specifications

  • Item: Front body post mount set
  • Material: Aluminium base, Delrin post
  • Model Number: CRA201F
  • Compatibility: TRAXXAS 1/10 Craniac Monster Truck

A practical upgrade for pilots who want firmer front body retention and a durable mounting point that holds through repeated use.

Is this compatible with other Traxxas front posts?

The mount is designed for the TRAXXAS 1/10 Craniac footprint; other Traxxas models may differ so verify the mounting hole layout before buying.

Will the stock fasteners work with this mount?

Most users can refit the stock screws since the mounting points are the same, but confirm screw length and torque after install.

How does the Delrin post behave over time?

Delrin provides a low-friction, wear-resistant interface so it keeps the shell secure without quickly enlarging the mounting holes.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved