TRAXXAS E-REVO Differential Housing Aluminium ER011 by GPM  [ER011]

TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011
Price:
NZD$33.34
Brand:
GPM
Model:
ER011
GTIN:
4894538266948
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011" title="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011"
alt="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011" title="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011"
alt="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011" title="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011"
alt="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011" title="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011"
alt="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011" title="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011"
alt="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011" title="TRAXXAS E-REVO Aluminium Front/Rear Differential Carrier -1pc set - GPM ER011"

Precision aluminium diff carrier for E-REVO

This aluminium front/rear differential carrier is an aftermarket replacement created for the TRAXXAS E-REVO platform, intended to act as a durable mount for the internal diff assembly and to assist gear alignment under load.

Supplied as a single-piece set, the aluminium construction offers greater rigidity than stock plastic housings. Where accessible from the axle ends, the carrier sits between the differential and suspension/diff mounts and can influence how torque transfers to the wheels.

Fitting advice: swap this carrier in place of the original front or rear housing and secure with standard fasteners. After installation inspect gear mesh and bearing alignment, and ensure the suspension moves freely without binding before final torqueing.

Specifications

  • Item: Aluminium front/rear differential carrier - 1 pcs
  • Material: Aluminium
  • Model Number: ER011
  • Compatibility: TRAXXAS E-REVO

A straightforward aluminium replacement for TRAXXAS E-REVO users wanting a firmer diff housing for maintenance or incremental tuning; confirm fit and engagement during assembly.

This item is compatible with

  • TRAXXAS E-REVO
  • TRAXXAS Rustler 4X4 VXL
  • TRAXXAS Stampede 4X4 VXL
  • TRAXXAS Slash 4X4
  • TRAXXAS-1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS-1/10 4WD 4-TEC 3.0 - 93454-4

Is this compatible with both front and rear positions?

Yes, the carrier is suitable for use as either a front or rear differential housing on TRAXXAS E-REVO chassis, but check specific brackets on your model.

Do I need special tools to fit it?

No special tools are required beyond standard RC hand tools; ensure you use the correct screw sizes and torque settings while checking gear mesh.

What hardware comes with the carrier?

The listing notes one plastic washer and four 2.5x8 stainless steel cap head screws; verify these items match the kit before you start the job.

Will using aluminium increase wear on gears?

The stiffer housing can change load paths and affect gear alignment, so double check mesh and bearing play to avoid accelerated wear.

Any tips for long term service?

Regularly inspect mounting points and fastener torque, keep bearings lubricated as recommended, and clean mating surfaces when performing maintenance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved