Traxxas E-Revo Steering Turnbuckle Set Stainless Steel 304 ER2162S/2 by GPM  [ER2162S/2]

Adjustable steering linkage for E-Revo

This turnbuckle kit is designed for the Traxxas E-Revo 56087-1 chassis and gives adjustable front and rear link lengths between the steering knuckles and tie rods. Manufactured from stainless steel 304, the items resist rust and provide stronger thread engagement compared with lower-cost plated linkages.

The set lets you alter linkage length to trim toe and steering response without replacing parts; rotate the turnbuckle body clockwise or counterclockwise to set the desired geometry. Included in the kit are the turnbuckles plus two sizes of round head screws to suit typical E-Revo mounting hole depths.

Installation is quick for those familiar with RC setups: remove the original linkage, mount the turnbuckles to rod ends and knuckles using the included screws, then fine tune by rotating the body. Check threads are fully engaged and use locking hardware or thread-lock where needed. This is an aftermarket tuning component for hobby use.