TRAXXAS E-REVO VXL Rear Wheel Hardware Kit ER2040/W by GPM  [ER2040/W]

TRAXXAS E-REVO VXL Aluminum Rebuild Kit For ER2040R Rear Adjustable Wheelie - 7pc set - GPM ER2040/W
Price:
NZD$40.96
Brand:
GPM
Model:
ER2040/W
GTIN:
4894538321982
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS E-REVO VXL Aluminum Rebuild Kit For ER2040R Rear Adjustable Wheelie - 7pc set - GPM ER2040/W" title="TRAXXAS E-REVO VXL Aluminum Rebuild Kit For ER2040R Rear Adjustable Wheelie - 7pc set - GPM ER2040/W"

Components for rear adjustable wheelie

This 7pcs aluminum rebuild kit supplies the wheel and axle components used on the ER2040R rear adjustable wheelie assembly for the TRAXXAS E-REVO VXL scale model. The kit targets the parts that secure the wheel and retain the rear axle while leaving motor, ESC, and suspension components unchanged.

Designed as hobby replacement parts for regular maintenance or setup tweaks, these items require basic RC workshop skills to fit, including axle alignment, wheel removal, and the judicious use of thread locker for secure fastening.

Packing includes

  • Wheel - 2pcs
  • Axle Rod - 1pc
  • M4 Locknut - 2pcs
  • Shim - 2pcs

Specifications

  • Item Rear adjustable wheelie rebuild kit, 7 pcs (wheel 2pcs, axle rod 1pc, M4 locknut 2pcs, shim 2pcs)
  • Material Aluminum
  • Model Number ER2040/W
  • Compatibility TRAXXAS E-REVO VXL ER2040R rear adjustable wheelie

Install this rebuild kit to renew wheel and axle hardware on the ER2040R rear wheelie assembly, helping to restore correct spacing and simple adjustment capability for hobby setups.

This item is compatible with

  • TRAXXAS E-REVO

Which parts come with the kit?

The kit contains two wheels, one axle rod, two M4 locknuts and two shims, matching the ER2040R rear wheelie configuration.

Is any modification needed to fit these parts?

No special chassis modification should be required if your vehicle uses the ER2040R rear adjustable wheelie; standard fitting and alignment are all that is normally needed.

Should I use thread locker?

Yes, apply a suitable medium-strength thread locker on steel-to-aluminum joints to prevent loosening under vibration, then recheck tightness after a short run-in.

How often should I inspect these parts?

Check wheel and axle hardware after intense sessions or every few maintenance intervals, looking for play, damaged threads, or worn shims.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved