TRAXXAS GT4 TEC 2.0 7mm Aluminium Hex Hub Adapters GT010/12X7MM by GPM  [GT010/12X7MM]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM
Price:
NZD$12.57
Brand:
GPM
Model:
GT010/12X7MM
GTIN:
4894538285994
Condition:
Brand New
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 7mm Thick - 12pc set - GPM GT010/12X7MM"

7mm aluminium hex hubs for GT4 setups

This aluminium hex adapter set is an aftermarket replacement intended for TRAXXAS 4WD GT4 TEC 2.0 installations where a precise wheel-to-axle interface is needed. Components are CNC-machined from 6061 T6 and sized at 7mm hex thickness to match wheel upgrades that require a thicker mounting face versus the original 6.8mm brake disk thickness.

The adapters locate on the axle to transmit wheel loads while preserving concentric alignment, which helps maintain predictable handling and consistent wheel mounting during tuning. A snug fit on the axle reduces play that can influence steering feedback and tyre life.

The kit contents are provided for straightforward swap or service:

  • 2x10 steel pin - 4 pcs
  • 2x5 stainless steel cap head screw - 4 pcs
  • Hex adapters - 12 pcs

Fitment tip: because the adapter face is 7mm, confirm clearance relative to the OEM 6.8mm brake disk on your GT4 TEC 2.0 hubs. These adapters are intended as a setup option to tweak wheel offset and improve engagement between wheel and axle without modifying hub geometry.

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0

Do these work with stock GT4 wheels?

They are compatible with many upgraded wheel setups for TRAXXAS GT4 TEC 2.0, but check wheel inner profile and hub clearance before fitting.

Can I run these on-road and track?

Yes, the 6061 T6 construction suits both road and track use when properly installed and maintained.

What should I check during setup?

Verify axle clearance, ensure pins are seated correctly and torque cap screws to avoid loosening under load.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved