TRAXXAS HOSS 4X4 VXL Metal Output Gears FR1200S/G2 by GPM  [FR1200S/G2]

TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2
Price:
NZD$46.10
Brand:
GPM
Model:
FR1200S/G2
Condition:
Brand New
Write a review
alt="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2" title="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2"

Replacement center differential output gears

The FR1200S/G2 gear pair provides replacement output gears for the #6780 center differential used across multiple TRAXXAS 1/10 4WD models. Made from medium carbon steel, the set is intended for routine rebuilds where a stronger metal gear is desired instead of the factory material.

Two identical output gears are included in the pack and are sold as a pair, making them convenient for differential servicing or when adjusting gear engagement. These components are scale RC drivetrain parts and are not suitable for full-size vehicle use.

Packing includes

  • Differential output gears - 2pcs

Original Name / Part No:

Part Location:Differential Gear

Compatible Models

  • TRAXXAS-1/10 4WD FORD F-150 RAPTOR R TRUCK-101076-4
  • TRAXXAS-1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS-1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS-1/10 Stampede 4X4 Brushless -67154-4
  • TRAXXAS-1/10 Rustler 4X4 Brushless -67164-4
  • TRAXXAS-1/10 Rustler 4X4 -67064-1
  • TRAXXAS-1/10 Rustler 4X4 -67064-61
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68077-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68086-4
  • TRAXXAS-1/10 Slash 4X4 -68054-1
  • TRAXXAS-1/10 Slash 4X4 -68054-61
  • TRAXXAS-1/10 Slash 4X4 Brushless -68154-4
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68277-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68286-4
  • TRAXXAS-1/10 Stampede 4X4 VXL -67086-4

Fit these medium carbon steel gears when replacing worn output gears or upgrading to metal during a centre diff rebuild; confirm they match the #6780 differential before proceeding.

Do I need to change shims when swapping these gears?

You should verify gear mesh and shimming during installation; metal gears can require small adjustments to achieve correct engagement and noise levels.

Will the extra weight affect handling?

The added mass of steel is minimal at this scale but contributes to durability; handling changes are typically negligible for most setups.

Are these suitable for off-road use?

Yes, they are intended for scale RC drivetrains and are robust enough for off-road running, provided the rest of the drivetrain is in good condition.

What maintenance is recommended?

Inspect for wear and debris during rebuilds, keep gear surfaces clean and lightly lubricated with an appropriate gear lubricant for best life.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved