TRAXXAS HOSS 4X4 VXL Middle Differential Spur Gear Medium Carbon Steel FR1200S/G1 by GPM  [FR1200S/G1]

TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Spur Gear For The #6780 Center Differential - GPM FR1200S/G1
Price:
NZD$36.70
Brand:
GPM
Model:
FR1200S/G1
GTIN:
4894538382044
Condition:
Brand New
Write a review
alt="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Spur Gear For The #6780 Center Differential - GPM FR1200S/G1" title="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Spur Gear For The #6780 Center Differential - GPM FR1200S/G1"

Aftermarket spur for TRAXXAS HOSS 4X4 VXL center diff

This medium carbon steel spur gear is an aftermarket replacement intended for use with the #6780 center differential on compatible 1/10 TRAXXAS 4WD vehicles. It functions as the main middle-differential gear and is aimed at repairs, routine servicing or durability upgrades where steel is desired over stock plastic or softer alloys.

Compatibility is limited to the TRAXXAS models listed below. Fit the gear into the center differential carrier using common reassembly practice, verify bearing seating and gear mesh, and set backlash to the recommended baseline before running. Use this item when you need a direct steel replacement that corresponds to the #6780 location.

Packing includes

  • Differential Gear set - 1pcs

Original Name / Part No:

3956X

Compatible Models

  • TRAXXAS-1/10 4WD FORD F-150 RAPTOR R TRUCK-101076-4
  • TRAXXAS-1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS-1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS-1/10 Stampede 4X4 Brushless -67154-4
  • TRAXXAS-1/10 Rustler 4X4 Brushless -67164-4
  • TRAXXAS-1/10 Rustler 4X4 -67064-1
  • TRAXXAS-1/10 Rustler 4X4 -67064-61
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68077-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68086-4
  • TRAXXAS-1/10 Slash 4X4 -68054-1
  • TRAXXAS-1/10 Slash 4X4 -68054-61
  • TRAXXAS-1/10 Slash 4X4 Brushless -68154-4
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68277-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68286-4
  • TRAXXAS-1/10 Stampede 4X4 VXL -67086-4

Select this medium carbon steel spur when replacing the #6780 center differential gear on compatible TRAXXAS 1/10 4WD rigs; double-check mesh, lubrication and bearings after installation to ensure reliable operation.

Yes, it is intended for the #6780 center differential location used by the listed TRAXXAS models, but you should confirm clearance and bearing fit during assembly.
Use a suitable differential gear grease or oil recommended for steel-on-steel gears and follow the vehicle's maintenance intervals to reduce wear and noise.
After installation, rotate the differential to confirm smooth engagement, check for binding, and verify backlash and mesh before subjecting the vehicle to high loads.
Inspect bearings, spider gears and the mating pinion; replace any components showing wear to avoid accelerated damage to the new spur gear.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved