TRAXXAS MAXX 16T Motor Gear TXMS016TS by GPM  [TXMS016TS]

TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS
Price:
NZD$15.25
Brand:
GPM
Model:
TXMS016TS
GTIN:
4894538335514
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"

16 tooth motor gear for reliable driveline engagement

This 16T motor gear is made as a replacement for TRAXXAS MAXX drivetrains and carries the part code TXMS016TS. It acts as the interface between the motor pinion and the drivetrain, transmitting torque while keeping correct tooth engagement.

Constructed from hardened steel #45 for improved wear resistance and dimensional stability under normal RC running conditions. Designed as an aftermarket upgrade to maintain or extend gear life and to stabilise engagement under load.

Fitment tips: align gear mesh carefully, confirm the motor pinion seats fully, secure the provided set screw, and inspect mesh and fastenings after a short test run to ensure stable operation.

Packing includes

  • Motor Gear - 1pcs
  • 4x4 Set Screw - 1pcs

Original Name / Part No:

6489X

This item is compatible with

  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4

Is this suitable for high torque brushless setups?

Hardened steel #45 provides stronger wear characteristics than softer alloys, but verify pinion size and motor load to ensure reliability with high torque systems.

Does the set screw come fitted?

A single 4x4 set screw is included in the packing and should be tightened after confirming correct mesh and alignment.

Any maintenance advice?

Check the mesh and set screw after the first few minutes of running, inspect for abnormal wear, and replace if any pitting appears on gear teeth.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved