TRAXXAS MAXX CVD Half Shaft Upgrade Adjustable Hardened Joint 6061 T6 Aluminum TXMS123F/RSA by GPM  [TXMS123F/RSA]

CVD half-shafts tuned for TRAXXAS MAXX performance

This aftermarket CVD shaft set suits TRAXXAS MAXX monster trucks and is listed under model TXMS123F/RSA. It replaces the stock cross-head style half-shaft with a constant velocity swing joint to give a cleaner torque transfer and to ease stress on the joint during suspension articulation.

Built from a hardened steel joint mated to a 6061 T6 aluminium body, the shafts balance toughness and lightness. The adjustable length feature lets you set alignment and reduce driveline binding on high-travel builds. These components are intended for model-scale drivetrain use only.

Fitting notes: suitable for use in either front or rear drive positions, installation requires wheel hex removal and access to the drivetrain. Confirm there is adequate clearance with your suspension links and bearing carriers, and recheck pins and mating surfaces after initial runs.

The TXMS123F/RSA kit is aimed at hobbyists upgrading MAXX drivetrains for better driveline geometry and tougher joint life while retaining adjustability.