TRAXXAS MAXX Front C-Hubs Compatible with 1/10 - TXMS019N by GPM  [TXMS019N]

TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N
Price:
NZD$59.82
Brand:
GPM
Model:
TXMS019N
GTIN:
4894538378429
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"

7075 aluminium front hubs for MAXX knuckles

Aftermarket front C-hubs intended for the front knuckle assemblies of TRAXXAS 1/10 MAXX trucks. Constructed from 7075 aluminium to provide a stiff yet lightweight option for drivers who tune handling and suspension response.

Delrin collars pressed into the hub bores reduce endplay at the king pin and limit metal-on-metal contact. The included stainless steel king pins resist rust and support consistent steering feel when running in wet or dusty conditions.

These C-hubs help stabilise knuckle movement so steering input transfers more predictably to the wheel, making it easier to dial in caster, toe and Ackermann for a given surface or tyre choice.

Packing includes

  • Front c-hubs - 2pcs
  • King pin - 4pcs

Original Name / Part No:

Part Location:Front c-hubsProduct major function & usage:Stabilize knuckle arms in order to rotate smoothly.

Compatible Models

  • TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
  • TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

These hubs fit directly to the listed TRAXXAS MAXX front knuckles; install using the supplied king pins and confirm there is adequate clearance with shocks and steering links before final assembly.

Can I use these with aftermarket knuckles?

They are intended for the factory-style MAXX knuckles listed; some aftermarket knuckles may require checks for bore size and pin spacing before fitting.

Will these change steering feel?

Reduced play from the Delrin collars typically tightens steering response, so small steering geometry adjustments may be needed after installation.

Are the king pins corrosion resistant?

Yes, stainless steel king pins are included to provide improved corrosion resistance compared with standard steel pins.

Should I check wheel alignment after fitting?

Yes, verify toe and caster after installation since the tighter hub fit can alter wheel alignment slightly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved