TRAXXAS MAXX Front Ring & Pinion Upgrade TXMS1200FS by GPM  [TXMS1200FS]

TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS
Price:
NZD$73.56
Brand:
GPM
Model:
TXMS1200FS
GTIN:
4894538334517
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Front Differential Ring Gear & Pinion Gear - 2pc set - GPM TXMS1200FS"

Front differential drive gears

This front ring and pinion set is manufactured for the TRAXXAS MAXX chassis and crafted from hardened steel #45. The replacement gears cut down on backlash and enhance tooth contact to maintain reliable front-end power transfer.

Designed for routine upkeep and tuning, the kit suits MAXX owners wanting firmer engagement in the front differential. Installation needs access to the front differential case and standard RC workshop tools.

Packing includes

  • Ring Gear - 1 pcs
  • Pinion Gear - 1 pcs

Original Name / Part No:

Improve the transmission of power in the differential case.

Specifications

  • Item Front differential ring & pinion gear set
  • Material Hardened steel #45
  • Model Number TXMS1200FS
  • Quantity 2 pcs
  • Compatibility TRAXXAS MAXX

Use this set when replacing worn front gears or when tuning for firmer mesh; confirm alignment and recheck after the first drive to ensure proper performance.

This item is compatible with

  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4
  • MAXX W/WIDEMAXX MONSTER TRUCK-89086-4

Do these replace the stock MAXX front gears directly?

They are made for the TRAXXAS MAXX platform and generally swap in, but always verify the ring and pinion dimensions match your differential before fitting.

Is special preparation needed for the gears?

No special prep is required beyond cleaning mating surfaces; use standard techniques to set gear mesh and ensure bearings and shafts are in good condition.

Will harder steel reduce gear noise?

Stiffer material can stabilise the tooth profile under load and help reduce noise related to excessive backlash, though correct mesh setting is still essential.

Maintenance after fitting?

Check mesh at low speed, look for uneven wear, and retighten fasteners after a short break-in period to confirm everything is seating correctly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved