TRAXXAS MAXX Suspension Pin Set TXMSACC/12 - Front and Rear Stainless Hardware by GPM  [TXMSACC/12]

TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12
Price:
NZD$45.07
Brand:
GPM
Model:
TXMSACC/12
GTIN:
4894538329285
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"

12-piece stainless hardware for suspension

This 12-piece stainless screw pin set is intended for TRAXXAS MAXX monster truck assemblies and serves as direct replacements at the original arm mounting points on the model.

The pack provides three distinct lengths to match arm positions: short outer screws for lower arms, medium inner screws for lower arms, and long outer screws for upper arms. Each screw features an internal hex socket so you can secure them with a hex driver for reliable clamping. Stainless steel lowers the chance of corrosion versus plated or mild-steel fasteners, and the hex drive design helps the fastener stay tight under heavy vibration from off-road running.

Important: these pins are for use with original arms only and are intended for routine maintenance and setup rather than for geometry-changing rebuilds.

Specifications

  • Item Front and rear suspension screw pin set
  • Material Stainless steel
  • Model Number TXMSACC/12
  • Contents Short outer screws for lower arms - 4 pcs, Medium inner screws for lower arms - 4 pcs, Long outer screws for upper arms - 4 pcs
  • Compatibility Suitable for original arms only

Replace worn or rusted stock pins with these stainless fasteners for more reliable suspension mounting; confirm correct lengths and thread engagement during installation and use the proper hex tool to protect the socket.

This item is compatible with

  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4
  • MAXX W/WIDEMAXX MONSTER TRUCK-89086-4

Will these pins work with stock arm bearings?

Yes, they are designed to match the original arm locations, but double-check that bearing bosses and bushings clear the pin lengths before tightening fully.

Do the pins require threadlocker?

For applications prone to heavy vibration you can use a medium-strength threadlocker sparingly on the threads, but ensure you can still remove the pins for maintenance.

Are the socket heads easy to strip?

If the correct hex size is used and you avoid excessive leverage, the internal socket is robust; avoid using worn drivers that can round the recess.

What maintenance is recommended?

Keep threads clean and lightly lubricated after cleaning, and inspect pins for wear or galling during routine suspension checks.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved