TRAXXAS MINI XRT VXL 3S 7075 Alloy Upper and Lower Suspension Arm Kit XRTM4567 by GPM  [XRTM4567]

7075-T6 alloy arms tailored for MINI XRT VXL 3S

This replacement kit supplies front and rear upper and lower suspension arms compatible with the TRAXXAS MINI XRT VXL 3S platform. Fabricated from 7075-T6 aluminium, the arms aim to stiffen the chassis mounting points and steady the knuckle and hub stub axle carriers while retaining the factory geometry.

Assembly replaces stock arms and uses the included outer arm pins and M3 lock nuts. Supplied pin lengths are 37.5mm for the front and 34.2mm for the rear, and the hardware is provided ready for installation. Use medium-strength thread locker on metal fasteners to reduce the risk of loosening during running.

The upgrade is intended as an RC-only hop-up and replaces factory part numbers #10725, #10740, and #10727; it is not suitable for real vehicle application.

If you want a plug-in aluminium replacement for improved durability, this 7075-T6 set provides a like-for-like mounting route; install with the supplied pins and M3 nuts and secure fasteners with medium-strength thread locker for consistent handling.