TRAXXAS Revo Alloy Throttle & Brake Linkage with Delrin Bushings TRV1325 by GPM  [TRV1325]

Precision throttle and brake linkage for Revo models

This TRV1325 aftermarket linkage is intended for TRAXXAS Revo and Revo 3.3 platforms. The alloy construction replaces standard plastic parts and uses Delrin bushings to reduce friction at the pivots while remaining compatible with Revo throttle and brake geometry.

It functions as a direct swap for the stock throttle/brake lever assembly, giving a stiffer mounting point and smoother pivot action thanks to the Delrin bushings. Hobbyists use it for fine tuning throttle and brake feel and to limit wear on original plastic pivot components.

Fitting is simple for users experienced with Revo assemblies: remove the original lever, move across necessary linkages and fixings, then install the alloy unit into the existing mounting. After installation check for free movement through the travel range, confirm clearance at maximum throw, and adjust linkage lengths or servo centring as required.

Because this is an aftermarket part, double-check compatibility with your chassis and reuse factory hardware where applicable. Periodic inspection of the Delrin bushings and fasteners after test runs will keep operation reliable.