TRAXXAS SLASH 4X4 Aftermarket Low-CG Main Shaft SLA025LCG by GPM  [SLA025LCG]

TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG
Price:
NZD$34.11
Brand:
GPM
Model:
SLA025LCG
GTIN:
4894538078329
Condition:
Brand New
Write a review
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"
alt="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG" title="TRAXXAS SLASH 4X4 LOW-CG Aluminium Main Shaft With Hard Steel Ends - 1pc set - GPM SLA025LCG"

Aluminium low-CG shaft tailored for Slash 4X4

This replacement main shaft is supplied as a single-piece set for the TRAXXAS SLASH 4X4 platform. The shaft couples an aluminium centre section with hardened steel end fittings to reduce rotating mass while keeping wear points robust.

Installation is familiar territory for anyone who services Slash 4X4 drivelines: remove the OEM shaft from the gearbox or output assembly, inspect splines and bearings, then install the new shaft using your existing retaining hardware. Standard hand tools are sufficient for the job.

As a tuning upgrade the low-CG profile helps minimise rotational inertia and the hardened ends maintain interface longevity, useful for smoother power delivery and extended service life during regular off-road use.

Specifications

  • Item Main Shaft
  • Material Aluminium body with hard steel ends
  • Model Number SLA025LCG
  • Compatibility TRAXXAS SLASH 4X4
  • Quantity 1 pcs

Use this shaft as a direct swap for compatible Slash 4X4 drivetrains to reduce rotating mass and strengthen contact points; verify spline and retention compatibility before final fitment.

Does this replace the stock Slash 4X4 main shaft?

Yes, where spline pattern and retention match the stock component. Confirm these details on your vehicle to ensure direct replacement without modification.

Will this improve driveline feel?

Reducing rotating mass can sharpen driveline response; results depend on the rest of your drivetrain and tuning setup.

What maintenance is recommended?

Regularly clean splines and mating faces, check for corrosion on the steel ends after wet use, and inspect bearings for wear to maintain performance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved