TRAXXAS Slash 4x4 Front CVD Shafts High Durability Hardened Steel #45 - SSLA1280FHST by GPM  [SSLA1280FHST]

TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST
Price:
NZD$57.88
Brand:
GPM
Model:
SSLA1280FHST
GTIN:
4894538322484
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Front CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1280FHST"

Front CVD upgrade for Slash 4x4 applications

This front CVD drive shaft set serves as an aftermarket replacement for the TRAXXAS 1/10 Slash 4x4 front axle, aimed at improving drivetrain longevity without altering the vehicle geometry. Construction uses hardened steel #45 for better wear life, a CVD layout for consistent torque delivery, and a spring-steel hex to minimise lash at the wheel mount.

The retractable CVD profile reduces interference in tight steering knuckles and allows the suspension to articulate with less binding, making it suitable for both short-course racers and light trail use. The package includes the small parts needed to reassemble the front carrier so you do not need to source extra pins or O-rings.

Packing includes

  • CVD - 2pcs
  • Screw Pin M4x2.5x12 - 2pcs
  • 4x2.5 Silicone O-Ring - 2pcs
  • 3x3 Screw Shaft - 2pcs

Original Name / Part No:

6850X+6828X+6854X

Specifications

  • Item: Front CVD drive shaft set, 8pc set
  • Material: Hardened steel #45
  • Model Number: SSLA1280FHST
  • Compatibility: TRAXXAS 1/10 Slash 4x4

Fit the SSLA1280FHST CVD set when you need a straightforward front axle replacement that prioritises toughness and steady rotational transfer while preserving the Slash 4x4 fitment.

This item is compatible with

  • TRAXXAS Slash 4X4

Are these CVDs a direct swap for Slash 4x4?

Yes, they are manufactured to match the Slash 4x4 front axle geometry for straightforward replacement.

How should I maintain these shafts?

Inspect the hex and pin areas regularly, keep O-rings clean, and apply light grease to the splines to reduce wear and noise.

What hardware is supplied in the kit?

The kit contains two CVDs plus the screw pins, silicone O-rings and screw shafts listed under Packing includes for easy installation.

Will these change steering feel?

They are designed to preserve the stock steering geometry while reducing driveline lash, which can result in a firmer, more predictable front response.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved