TRAXXAS Slash 4x4 Front Suspension Spring 1.3mm Coil SLA087F/SP13 by GPM [SLA087F/SP13]

TRAXXAS Slash 4x4 Slash Front Shock Spring (Coil LenGTh 1.3mm) - 1pr - GPM SLA087F/SP13

Price:

NZD$2.73

Brand:

GPM

Model:

SLA087F/SP13

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Traxxas - Slash 4x4

Front suspension spring for Slash 4x4

This front shock spring is produced for use on the TRAXXAS Slash 4x4 chassis and is supplied as a single pair. The defining measurement is the 1.3mm coil length, used to predict how the spring will behave when tuning the front end.

Installation is a straightforward direct-swap in compatible front shocks. Remove the cap and piston assembly, replace the spring, then reassemble using the correct preload and shock oil to restore the intended damping and ride height. This item is designed for scale RC suspension use only.

Changing springs alters front stiffness and ride height; swap one corner first to assess handling, and install matched springs together for even response across the axle.

Will this fit non-standard Slash 4x4 shocks?

It fits standard TRAXXAS Slash 4x4 front shock geometry; for modified or custom shocks check internal travel and seat spacing before fitting.

Should I expect a big change from stock springs?

Differences depend on your current springs and damper setup. The 1.3mm coil length will change preload and effective rate, so test progressively to reach the desired front feel.