Traxxas TRX-4 Aluminum Front C-Hubs (Gun Metal) JR-TRX411-GU Upgrade by Jazrider  [JR-TRX411-GU]

Traxxas TRX-4 Aluminum Front C-Hubs (Gun Metal) Set
Price:
NZD$19.96
Brand:
JAZRIDER
Model:
JR-TRX411-GU
Condition:
Brand New
Available in shop
Write a review

Gun metal C-hubs for TRX-4 trail use

The JR-TRX411-GU front C-hub kit is an aftermarket replacement for the Traxxas TRX-4 platform, finished in gun metal anodise. It replaces the plastic hubs with a metal option to reduce steering pivot flex and enhance longevity during heavy trail sessions.

Compatibility focuses on the TRX-4 layout; the hubs align with the standard TRX-4 spindle and knuckle mounting points. Most installations use the existing hardware so no bespoke adaptors are normally needed for standard TRX-4 vehicles.

Practically, metal C-hubs preserve steering geometry under load, which can change toe and caster characteristics during tight maneuvers and crawler work. Their main benefit is predictable alignment and reduced deformation after repeated impacts.

When fitting these hubs, inspect threads and bearing seats, clear any casting flash, verify suspension and linkage clearance, and torque fasteners to published specs. Applying a light threadlocker is a common practice to prevent loosening on rough trails.

Will these survive sustained rock crawling?

They are aluminium parts designed to be tougher than stock plastic hubs and resist deformation from repeated loading, making them a good option for consistent trail abuse.

Do they change axle alignment under load?

By reducing pivot flex the hubs help hold alignment under strain, which can modify how toe and caster react when the suspension is compressed or steering is applied slowly.

Are any extra parts required to fit them?

No special adapters are typically required; these hubs are made to use the TRX-4's standard fasteners and mounting points on stock knuckles and spindles.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved