TRAXXAS TRX4 FORD BRONCO Stainless Adjustable Link Set 20pcs STRX4160F by GPM  [STRX4160F]

Stainless adjustable links for better longevity

This 20pcs stainless steel link kit is an aftermarket replacement set produced by GPM for TRAXXAS TRX4 FORD BRONCO platforms, designed to take the place of the stock upper and lower suspension links while adding user-adjustable length. The tie rod bodies are thicker than the original design to improve wear resistance and reduce the chance of corrosion over extended use.

Adjustments are made through the central hole on each tie rod by inserting a small tool and turning in the counter-clockwise thread direction specified. That approach lets you fine-tune axle alignment and roll behaviour without removing the whole assembly, which is useful for trail and scale crawling setups.

Installation follows standard practice: remove original link fasteners, fit the stainless links to the same mounting locations, and secure using the included stainless round head screws. Confirm smooth articulation across the travel range and check that both sides mirror the same link lengths before final tightening.

If you want a low-maintenance, adjustable link solution for TRX4 Ford Bronco style rigs, this GPM stainless set gives the core hardware and adjustment method needed to keep suspension geometry consistent on the trail.