TRAXXAS TRX4 Scale Front Bumper w/ Winch Plate TRX4330FB by GPM  [TRX4330FB]

Front bumper kit for TRX4 Trail Crawler

This is an aluminium front bumper made for the TRAXXAS TRX4 Trail Crawler, supplied as a 13-piece kit. The assembly features a winch plate and mounting posts that help absorb impact and reduce damage from trail contact. Fabrication uses T6-grade aluminium to offer greater rigidity and wear resistance versus standard plastic components.

The styling is kept neat to preserve a street-inspired look while adding practical protection and a scale winch mount. The supplied posts and mounting slots allow basic width and height adjustments so you can set the approach angle and bumper position. The winch plate requires the bumper width to be set within 74mm to be compatible.

Installation follows typical TRX4 aftermarket steps: remove the original bumper, check alignment with the TRX4 front mounting points, and fasten with the supplied stainless screws. Use appropriate hand tools and avoid over-torqueing to protect the aluminium parts and chassis threads.

For hobbyists after a solid, scale-looking aluminium front bumper with a mounted winch plate, this kit delivers mounting adjustability and the strength of T6 aluminium suitable for trail and street use.