TRAXXAS TRX6 Rear Scale Aluminum Bumper 5pc for MERCEDES-BENZ TRX6330R by GPM  [TRX6330R]

TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R
Price:
NZD$54.67
Brand:
GPM
Model:
TRX6330R
GTIN:
4894538337143
Condition:
Brand New
Write a review
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set - GPM TRX6330R"

Rear aluminium bumper for TRX6 scale crawlers

This 5-piece aluminium rear bumper set has been developed for TRAXXAS TRX6 MERCEDES-BENZ scale models and is supplied to replace or upgrade the stock rear bumper on crawler projects. It adds realistic rear protection and a clean scale look to the build.

Constructed from Aluminum 6061 T6, the bumper balances weight and strength for everyday hobby use on rough terrain. The kit includes the machined bumper and the required mounting screws so you can install without sourcing extra parts.

Fitting is simple: remove the factory rear bumper, position the aluminium assembly at the original mount points, and fasten with the supplied stainless steel screws. Depending on body shell fitment, you might need to trim minor non-structural mounts, but no chassis modification is needed for typical TRX6 MERCEDES-BENZ configurations.

Packing includes

  • Rear bumper - 1pcs
  • Stainless steel round head screw 3x8 - 4pcs

Original Name / Part No:

TRAXXAS TRX6 MERCEDES-BENZ Aluminum Rear Bumper - 5pc set

Specifications

  • Item: Rear bumper set
  • Material: Aluminum 6061 T6
  • Model Number: TRX6330R
  • Compatibility: TRAXXAS TRX6 MERCEDES-BENZ 88096-4

Add this aluminium rear bumper to improve rear protection and scale appearance on TRX6 MERCEDES-BENZ crawlers while keeping installation and upkeep straightforward.

Is this compatible with all TRX6 Mercedes shells?

It is intended for the TRAXXAS TRX6 MERCEDES-BENZ body; most standard shells will fit without chassis changes, though some shells may need minor body mount trimming.

Does the set include mounting screws?

Yes, the package includes four stainless steel round head screws 3x8 so you can fit the bumper straight away.

Will this change ground clearance or approach angle?

The part follows scale proportions and generally maintains original ground clearance; any change depends on body and mount trimming rather than the bumper itself.

Recommended upkeep after trail runs?

Rinse mud away, dry thoroughly, and recheck fastener torque after heavy off-road use to prevent loosening.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved