TRAXXAS TRX6 Rear Trunk Stainless Trim 0.7mm 19pc - TRX6ZSP2B by GPM  [TRX6ZSP2B]

TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B
Price:
NZD$45.93
Brand:
GPM
Model:
TRX6ZSP2B
GTIN:
4894538331394
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Stainless Steel Truck Trunk Lid (Style B) - 19pc set - GPM TRX6ZSP2B"

Stainless decorative trunk panels for TRX6

This 19-piece assembly provides stainless trunk panels plus hardware for neat installation on a TRAXXAS TRX6 MERCEDES-BENZ 88096-4 scale body. It is aimed at hobbyists who want a tidy, corrosion-resistant trim on the model's rear area.

The kit suits DIY fitting and fine-tuning: panels may be adhered using double-sided tape for a non-destructive mount, or fixed permanently by drilling 2.5mm pilot holes and securing with the included screws and locknuts. The stainless plates are 0.7mm thick and act as protective decorative trim in normal RC use.

Specifications

  • Item: Truck trunk lid set, 19pcs.
  • Material: Stainless steel, 0.7mm thickness.
  • Model Number: TRX6ZSP2B.
  • Compatibility: TRAXXAS TRX6 MERCEDES-BENZ 88096-4.

Use this set to add a low-maintenance stainless accent to your TRX6 MERCEDES-BENZ scale model, choosing tape for easy removal or screws for a secure fit.

This item is compatible with

  • TRAXXAS-1/10 TRX-6 MERCEDES-BENZ-88096-4

What comes in the package?

The pack includes the stainless trunk panels, eight 3x10 round head screws, eight 3mm locknuts, and a 2.5mm pilot drill bit.

Is trimming or shaping required before fitting?

Most bodies accept the panels with minimal adjustment, but light trimming or sanding may be needed for perfect alignment depending on body fit.

What adhesive is recommended for a temporary fit?

Use automotive-grade double-sided tape or removable foam tape to avoid permanent changes to the body shell.

Will the stainless steel corrode over time?

The stainless finish reduces corrosion risk in normal conditions; clean and dry panels after exposure to salt or harsh grime.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved