TRAXXAS TRX6 Wheel Hex Upgrade 23mm TRX6010X/23M by GPM  [TRX6010X/23M]

Heavy 23mm hex adapters for TRX6 scale wheels

This 30pcs brass wheel hex adapter kit is intended for fitting TRX6 MERCEDES-BENZ scale wheels when a heavier, wider hub is preferred to alter track width and tighten wheel fit. The adapters are made for RC-scale use and connect each wheel to the front CVD and rear drive shaft assemblies while increasing track for reduced side play.

Each brass hex is 23mm in diameter and the set supplies mating fasteners and shims to suit common TRX6 hubs. Brass construction brings solid durability and a measurable weight addition (noted at 17g each), which can lower the centre of gravity and help stabilise tyre roll on rocky trails and technical crawls.

Fitting notes: remove the original hex, fit the brass adapter, secure with the included shaft and hex socket screws, and add 5mm shims or washers where needed to reach the correct offset. The broader hex face reduces wheel-to-hub gap for a firmer attachment without axle modification.

If you want a heavier, wider hub to refine wheel offset and track on TRX6 Mercedes-Benz models, this brass hex adapter set offers a straightforward, robust upgrade that works with standard CVD and drive shaft connections.