TRAXXAS Unlimited Desert Racer 3.4mm Stainless Anti-Roll Sway Bars Front+Rear SUDR311FR by GPM  [SUDR311FR]

Durable 3.4mm stainless sway bars for SUDR312FS/FRS

This aftermarket sway bar kit is intended for TRAXXAS Unlimited Desert Racer models and provides a simple path to firmer roll control at both the front and rear. The thicker stainless rods change axle roll response while leaving existing suspension geometry intact.

Hardware notes: the kit replaces thinner stock links with stainless steel rods increased to 3.4mm for higher torsional stiffness. The package ships with the reamer and required fitment hardware. Included items are 2 pcs sway bar elements plus 1 pcs reamer for enlarging locating holes.

Installation tip: gradually use the supplied reamer to open locating holes on the chassis or mounts so the rods pass freely. Make small adjustments and verify that the sway bar pivots and end links align correctly before final torque.

Setup advice: stiffer stainless bars reduce body roll on the fitted axle and will move handling toward understeer or oversteer depending on which axis is stiffened - adjust front and rear independently to refine cornering balance.

Compatibility note: this product fits SUDR312FS & SUDR312FRS only; double-check your chassis code before ordering.