TRAXXAS UNLIMITED DESERT RACER Reinforced Front Upper Arm Brace 5mm - UDR008 by GPM  [UDR008]

Reinforced front upper arm brace

This CNC-machined aluminum brace is an aftermarket reinforcement for the TRAXXAS UNLIMITED DESERT RACER chassis that helps minimise lateral movement and support repeatable front-arm geometry. The set contains three pieces that bolster the upper arm mounting points while working with the original suspension parts.

Construction highlights taken from the provided information: machined from 6061 T6 aluminum, thickened to 5mm from a common 3mm profile to improve rigidity, and finished with a 3D CNC surface. The kit includes stainless 3x10 round head screws for attachment to factory locations.

Fitment guidance: mount the stabilizer to the existing upper arm attachment points using the supplied screws and a matching hex driver. After installation, cycle the suspension through full travel and turn the steering to full lock to confirm there is no interference.

Handling impact: the brace increases resistance to lateral deflection at the upper arm mounts, which can stabilise steering inputs over rough ground and make handling more predictable across varying sections of a course. It does not directly increase top speed.

Fit this stabilizer when you need cleaner, more consistent front-end behaviour on rough tracks and always re-check clearances after fitting.