TRAXXAS X-MAXX Front Suspension Mount Upgrade TXM300F by GPM  [TXM300F]

TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F
Price:
NZD$48.71
Brand:
GPM
Model:
TXM300F
GTIN:
4894538161922
Condition:
Brand New
Write a review
alt="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F" title="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F"
alt="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F" title="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F"
alt="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F" title="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F"
alt="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F" title="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F"
alt="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F" title="TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set - GPM TXM300F"

Front suspension mount upgrade for X-MAXX

This aluminium front suspension holder provides a metal replacement option for TRAXXAS X-MAXX lower mounts. It retains the OEM mount positions while offering a firmer alternative to the stock plastic part for drivers wanting crisper front-end feedback.

Supplied as a single-piece unit, the holder fits the front lower suspension location and is useful for repairing broken mounts or tightening up the front link geometry for better setup consistency. The reduced local flex of the aluminium part affects steering and suspension response in a predictable way compared with the standard material.

Installation tips: verify that ball studs, linkages and existing fasteners align with the factory pattern before final tightening. Use compatible hardware and torque in stages to protect threads. After mounting, check droop and wheel alignment and make any required setup adjustments.

Specifications

  • Item TRAXXAS X-MAXX Aluminium Front Suspension Holder - 1pc set
  • Material Aluminium
  • Model Number GPM TXM300F
  • Compatibility TRAXXAS X-MAXX

Use this holder to replace damaged mounts or when you want a more rigid front mounting point to aid tuning and setup work.

This item is compatible with

  • TRAXXAS XMAXX
  • TRAXXAS X MAXX 8S Monster Truck

Is the part compatible with aftermarket link kits?

Compatibility depends on the kit's hole spacing; most kits that follow factory geometry will work but double-check measurements before fitting.

Will this holder corrode in wet conditions?

Aluminium resists rust but can oxidise; keep exposed surfaces clean and consider a light protective coating if you run in salty or wet environments frequently.

Do I need to change shock mounting hardware?

If the shock mounting pattern is unchanged you can usually reuse the original hardware, though checking thread condition and fit is recommended.

Can this be used on both front corners?

This version is intended for the front lower mounting location; check whether left and right are served by the same part or if a separate mirrored piece is required for your setup.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved