TRAXXAS X-Maxx Performance Coil Springs 2.6mm - TXMSP26 by GPM  [TXMSP26]

Heavy-Duty 2.6mm Coil Springs for X-Maxx

These 2.6mm coil springs are an aftermarket spring set intended for the TRAXXAS 1/8 X-Maxx platform and are supplied as one set. They are designed as a direct-fit spring option for the X-Maxx shock assembly and can be used with the original shocks or with optional GPM dampers.

The larger 2.6mm wire increases stiffness relative to stock light coils, which reduces roll and tightens rebound response during hard landings and cornering. That makes this spring choice suitable for drivers who want sharper suspension feel for competitive or fast recreational driving.

Fitting is simple: remove the shock cap and spring retainer, take off the old spring and slide the 2.6mm spring into place, ensuring correct orientation and preload. Confirm the spring seats correctly on the shock perch and verify full travel to avoid coil bind. Tune preload in small increments and re-test.

Tuning notes: combine these springs with a suitable shock oil grade and piston selection to match the higher spring rate; heavier oil or smaller piston orifices will help control rebound. Always bench-test assemblies and do a short on-track check after adjustments.