TRAXXAS X-MAXX Steering Upgrade Stainless Steel Tie Rods 4pcs TXM024AS by GPM  [TXM024AS]

Price:
NZD$9.94
Brand:
GPM
Model:
TXM024AS
GTIN:
4894538321517
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Overview and fitment notes

This 4-piece stainless steel servo tie rod kit is produced for TRAXXAS X-MAXX scale RC cars and carries the model number TXM024AS. These rods act as aftermarket steering links or direct replacements, offering a harder-wearing material choice over softer stock links.

Installation is simple for model builders: remove the old ties from the servo horn and knuckles, move over any compatible rod ends, then install the new rods while ensuring correct thread engagement and unhindered steering travel. Typical hobby tools such as hex drivers and pliers are all that are required.

Upgrading to stainless links reduces steering flex under load, which can sharpen steering input and help when setting toe and steering behaviour. After fitting, confirm alignment and full steering sweep to prevent binding; these parts are for model use only.

This item is compatible with

  • TRAXXAS XMAXX

Do these replace the stock X-MAXX tie rods exactly?

They are intended as aftermarket replacements for TRAXXAS X-MAXX steering, but check that TXM024AS matches your original rod length and thread pitch before final installation.

Should I lubricate the threads?

Lightly coat threads with a hobby-safe lubricant to keep adjustments smooth and to reduce wear; avoid heavy greases that attract dirt.

Any tips for avoiding steering bind?

Confirm that rod ends are seated correctly and that the full range of steering movement is free; trim or adjust link length if you detect interference.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved