TRAXXAS XRT 8S 7075-T6 Front Steering Assembly XRT048 by GPM  [XRT048]

TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048
Price:
NZD$133.51
Brand:
GPM
Model:
XRT048
GTIN:
4894538370935
Condition:
Brand New
1 Reviews
Write a review
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"
alt="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048" title="TRAXXAS XRT 8S Aluminum 7075-T6 Front Steering Assembly - GPM XRT048"

Stiffer front steering solution for XRT 8S

This 7075-T6 aluminum front steering assembly is created for the TRAXXAS XRT 8S 1/6 scale chassis as a replacement and tuning component to alter steering behaviour.

The part installs at the front knuckle/arm area and mates with the stock steering linkage and servo. A machined metal mount reduces unwanted flex and provides a firmer anchor for linkages, which affects steering precision during setup and track testing.

Fitting tips: remove the bumper and steering links to reach the front assembly, retain compatible factory hardware, confirm servo horn position and linkage lengths after install, use thread-lock on any metal fasteners and check steering range before use.

Original Name / Part No:

7843

Compatible Models

  • TRAXXAS-1/6 4WD XRT 8S-78086-4

For hobbyists wanting a firmer steering anchor on the TRAXXAS XRT 8S, this 7075-T6 assembly gives a simple aftermarket upgrade to tune steering response and boost durability on organised runs.

 

Product Reviews
1 Reviews
rating
Good service and great looking parts,every thing is nice and good working condition

Is this a direct swap for the stock piece?

Yes, it is intended as a direct aftermarket replacement for the front steering area, but always verify mounting points and screw sizes against your truck.

Will it change steering feel?

Using 7075-T6 metal typically reduces compliance at the mount, making steering crisper; adjustments to link lengths or servo endpoints may be needed.

Any special tools required?

Basic hand tools are sufficient; keep a selection of metric hex drivers and thread-lock for metal fasteners on hand.

Does it affect servo load?

A stiffer mount can slightly change load characteristics; check servo travel and horn alignment after fitting to avoid binding or trimmed travel limits.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved