Trumpeter 07251 Sd.kfz.9/1 1:72 FAMO 18t Recovery Model Kit  [TP07251]

Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII
Price:
NZD$20.74
Brand:
Trumpeter
Model:
TP07251
Condition:
Brand New
Write a review
alt="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII" title="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII"
alt="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII" title="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII"
alt="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII" title="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII"
alt="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII" title="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII"
alt="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII" title="Trumpeter 07251 Drehkran 6t auf Zugkraftwagen 18t (Sd.kfz.9/1) WWII"

Trumpeter 1:72 Sd.kfz.9/1 WWII German Heavy Recovery Scale Model

The Trumpeter 1:72 Sd.kfz.9/1 kit captures a notable WWII recovery vehicle built by FAMO. In production from 1939, the Sd.kfz.9 was the largest half-track used by Germany and this version is fitted with a 6-ton crane on the Sd.kfz.9 18t "FAMO" chassis. The historical engine spec referenced is the Maybach HL108TUKRM rated at 250 horsepower.

Accuracy in Miniature

The finished model measures 141.3 mm long, 38.1 mm wide and 58 mm tall, translating the imposing scale of the original into a compact display piece. The kit contains 332 plastic parts, offering detailed sections and authentic assembly steps for experienced builders.

Presentation and Museum Style Display

As a display piece this Sd.kfz.9/1 stands out among WWII ground vehicles. Full-length tracks, three tyres and fine surface detail create a convincing silhouette, while the German Army decals allow historically faithful markings for museum-style presentation.

Specifications

  • Scale: 1:72
  • Length: 141.3 mm
  • Width: 38.1 mm
  • Height: 58 mm
  • Total Plastic Parts: 332
  • Total Sprues: 10 sprues and chassis frame
  • Decal Marking: German Army
This kit is better suited to modellers with some experience due to the many small parts and track components. Beginners could complete it with patience and the right tools.
Use precise plastic cement for structural joins and CA glue for tiny fittings if needed. Fine files, sprue cutters and needle files help with clean preparation at this scale.
Thin layers of paint and careful shading with washes or pin washes reveal panel lines. Drybrushing very lightly highlights edges without obscuring fine parts.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved