TRX4 Crawler Bevel Gear 34T with 11T Pinion 40CR Steel Replacement TRX41134T by GPM  [TRX41134T]

TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 34T & Pinion Gear 11T - GPM TRX41134T
Price:
NZD$36.70
Brand:
GPM
Model:
TRX41134T
GTIN:
4894538380378
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 34T & Pinion Gear 11T - GPM TRX41134T" title="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 34T & Pinion Gear 11T - GPM TRX41134T"

Replacement bevel and pinion for TRX4 crawlers

This gear set provides a replacement internal differential bevel and matching pinion for TRX4-style trail crawlers. The package contains a 34T differential bevel and an 11T pinion, both produced in 40CR steel for scale drivetrain applications only.

Installed inside the inner area of the front or rear gearbox, the bevel gear set passes torque from the drive output to the axle shafts. These aftermarket components are intended to re-establish correct tooth engagement and steady power delivery while crawling.

Fitting tips: confirm gear mesh and any backlash against your existing spur and pinion before locking the gearbox, remove any trapped grit or old grease, and lubricate the gear surfaces with a dedicated RC gear grease to keep operation smooth.

Packing includes

  • Diff bevel gear - 1pcs
  • Pinion gear - 1pcs

Original Name / Part No:

8279?8279R

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 DEFENDER TRAIL CRAWLER -82056-4
  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 FORD BRONCO TRAIL CRAWLER-82046-4
  • TRAXXAS-1/10 4WD ELECTRIC TRX-4 BLAZER -82076-4
  • TRAXXAS-1/10 AND TRX-4 1972 CHEVROLET K5 BLAZER TRAIL CRAWLER-92086-4
  • TRAXXAS-1/10 AND TRX-4 CHEVROLET K10 TRAIL CRAWLER-92056-4
  • TRAXXAS-1/10 AND TRX-4 CRAWLER EQUIPPED WITH TRAXX-82034-4
  • TRAXXAS-1/10 AND TRX-4 FORD BRONCO TRAIL CRAWLER-92076-4
  • TRAXXAS-1/10 AND TRX-4 FORD F-150 RANGER XLT TRAIL CRAWLER-92046-4
  • TRAXXAS-1/10 AND TRX-4 LAND ROVER DEFENDER TRAIL CRAWLER-82056-4
  • TRAXXAS-1/10 4X4 TRX-4 SPORT HIGH TRAIL EDITION-82044-4
  • TRAXXAS-1/10 TRX-4 SPORT UNASSEMBLED KIT-82010-4
  • TRAXXAS-1/10 TRX-4 SPORT-82024-4
  • TRAXXAS-1/10 TRX-4 UNASSEMBLED KIT-82016-4
  • TRAXXAS-1/10 TRX-6 MERCEDES-BENZ G 63 AMG 6X6-88096-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-84

When internal diff teeth show wear, replace them with this 40CR bevel and pinion set to regain consistent crawling performance in TRX4 and compatible TRX-6 gearboxes.

How do I confirm tooth count and fit?

Measure and verify the 34T bevel and 11T pinion tooth counts against the gearbox drawings or the Compatible Models box to ensure direct fitment.

Should I re-use old bearings?

Inspect bearings for play or corrosion and replace any suspect bearings before installing the new gears to protect gear life.

What grease is recommended?

Use a medium to heavy RC gear grease formulated for metal-on-metal contact to help prevent wear during slow crawling use.

Do I need to shim anything else?

Only set gear mesh and check axle positioning; additional shimming is rarely required if factory spacers are intact and bearings are seated correctly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved