TRAXXAS TRX4 Upper and Rear Link Upgrade TRX4161ST by GPM  [TRX4161ST]

TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST
Price:
NZD$25.72
Brand:
GPM
Model:
TRX4161ST
GTIN:
4894538288568
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST" title="TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST"
alt="TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST" title="TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST"
alt="TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST" title="TRAXXAS TRX4 TRAIL CRAWLER Spring Steel Upper & Rear Steering & Suspension Links -7pc set - GPM TRX4161ST"

Fit notes and highlights

The TRX4161ST seven-piece spring steel link set is aimed at TRAXXAS TRX4 Trail Crawler owners seeking stronger upper and rear steering and suspension links. The nominal rod diameter steps up to 6.5mm versus typical 5mm stock rods to improve wear life under scale loads.

Threaded adjustable ends permit toe and axle corrections, with a counter-clockwise adjuster thread for precise tuning. Anodised finishes provide corrosion resistance and blend with common scale paint schemes. Reference midpoint center-to-center figures from the source are: front lower steering 133.2mm, front upper steering 77.3mm, and rear supportive tie rod 77.6mm to help validate TRX4 fitment.

Packing includes

  • Stainless Steel Round Head Screw 3*25 - 1pcs
  • Stainless Steel Round Head Screw 3*16 - 3pcs
  • Stainless Steel Round Head Screw 3*14 - 1pcs
The set supplies the seven spring steel links plus the stainless screws shown in the Packing includes list; verify any additional hardware your build may require.
Yes, the links have adjustable ends and a counter-clockwise thread adjuster for fine length adjustments to set toe and axle position on TRAXXAS TRX4 chassis.
Increasing the rod diameter to 6.5mm improves resistance to bending and wear during slow, heavy-duty crawls and scale driving compared with standard 5mm tie rods.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved